Shop

This is where you can browse products in this store.

Adapters

Threaded adapters for connecting pipes of different sizes and materials

Multiple thread type options (NPT, BSPP, BSPT)
Size range from 1/4″ to 2″ connections
Material options: brass, stainless steel, or ductile iron
Pressure ratings up to 6000 PSI depending on material

Aluminum Pipes

Lightweight aluminum piping for corrosion-resistant fluid transport

Lightweight construction (approximately 1/3 the weight of steel)
Excellent corrosion resistance in marine and chemical environments
Diameter range from 1/2″ to 4″ OD
Pressure ratings from 150 to 500 PSI depending on wall thickness

Bag Filters

High-capacity cartridge-style bag filters for large-volume industrial fluid filtration

Design: Simplex and duplex configurations for different flow requirements
Element size: Double-length 32″ cartridges for high dirt-holding capacity
Materials: GFPP and PVC/CPVC for chemical compatibility options
Port sizes: 1-1/4″ to 4″ connections for large-volume applications

Ball Check Valves

PVC check valves with ball element for backflow prevention in low-pressure applications

Ball element design with minimal cracking pressure
Socket or threaded connection options for PVC piping
Size range: 1/2″ to 2″ for residential applications
Working pressure: 100-200 PSI depending on size

Ball Valves

Quarter-turn ball valves for reliable shutoff and flow control

Quarter-turn operation from fully open to closed position
Thread sizes from 1/4″ to 2″ with various port configurations
Working pressures up to 1000 PSI in full-port designs
Material options: brass, carbon steel, or stainless steel construction

Basket Strainers

Tank-mounted basket strainers for heavy-duty particulate removal in industrial piping

Sizes: 1/2″ to 8″ port connections for diverse flow requirements
Materials: PVC, CPVC, GFPP BLACK, GFPP PLATINUM, EASTAR® options
Design: Simplex configuration for single-line installations
Mounting: Tank-mounted with threaded port connections

Brass Pipes

Corrosion-resistant brass piping for drinking water and low-pressure systems

Diameter range from 1/2″ to 2″ for standard applications
Wall thickness options for different pressure requirements
Rated for potable water use per NSF/ANSI 61 certification
Working pressures up to 250 PSI at room temperature

Bulkhead Fittings

Tank-mounted bulkhead fittings for through-wall PVC pipe connections with leak-free sealing

PVC or reinforced nylon construction options
Thread sizes: 1/2″ to 2″ NPT standard connections
Sealing materials: EPDM (standard) or Viton (chemical resistant)
Pressure rating: 150 PSI for most applications

Bushings

Reducing bushings for connecting different diameter pipes

Size reductions from 2″ down to 1/4″ inlet/outlet combinations
Wrench-flat hex design for secure tool engagement
Tapered thread design ensures reliable leakage-free seals
Material options: brass, steel, or stainless steel

Butterfly Valves

Large-diameter butterfly valves for flow control in PVC piping systems with minimal space requirements

Wafer or lug-body configurations for different mounting
Sizes from 2″ to 12″ diameter for various flow rates
Manual butterfly handle or motorized actuator options
Pressure rating: 100-150 PSI in PVC construction

Camlocks

Quick-disconnect camlock couplings for rapid PVC hose and pipe connection in industrial applications

Connector types: A, B, C, D profiles for various industries
Materials: PVC or aluminum construction options
Integral shut-off ball or flapper valve designs
Size range: 1/2″ to 4″ for diverse flow requirements

Caps

Pipe end caps for sealing unused ports and test plugging

Thread sizes from 1/4″ to 2″ standard connections
Domed top design prevents debris accumulation
Material options: brass, steel, stainless steel, or PVC
Working pressures compatible with rated piping systems

Carbon Steel Pipes

High-strength carbon steel pipes for industrial and utility applications

Diameter range from 1/2″ to 4″ for standard applications
Wall thickness options from Schedule 40 to Schedule 160
Tensile strength of 60,000 PSI enables high-pressure applications
Compatible with both threaded and welded connections

Cast Iron Pipes

Durable cast iron piping for water and sewage applications

Standard diameter range from 3″ to 24″ for main applications
Pressure ratings from 150 to 300 PSI depending on thickness
Ductile iron provides improved impact resistance over gray iron
Standard bell-and-spigot or mechanical joint connections

Cement & Primer

Solvent cement and primers for permanent PVC pipe joint assembly in water and waste applications

Primer removes oxidation and PVC surface contaminants
Solvent cement available in standard and heavy-bodied formulations
Fast-set and regular-set options for application flexibility
Meets ASTM D2564 and NSF standards for potable water use

Check Valves

One-way check valves preventing backflow in piping systems

Swing or lift check designs for different flow requirements
Thread or flange connections for system integration
Cracking pressure adjustable in some models for performance tuning
Working pressures up to 600 PSI in standard configurations

Compact Ball Valves

Compact ball valves in miniature sizes for space-constrained PVC applications requiring reliable shutoff

Miniature design with full-port flow characteristics
Socket or threaded connection options for PVC piping
Size range: 1/4″ to 1″ for compact installations
Working pressure: 150-250 PSI depending on size

Conductivity Controllers

Advanced conductivity control with intelligent stepping menu and data logging

Large Color LCD Display with 400-day logging capacity
SimplCal® Auto-calibration System
Panel/Wall/Pipe Mount / M12 Quick Connect
Relay Output / 4-20mA options

Conductivity Sensor Transmitter

Exciting new technology for conductivity TDS salinity and resistivity measurement

IO-Link enabled with 2-wire 4-20mA / RS485 options
M12 Quick Connect / 3/4″ NPT fittings
High Accuracy with Factory Calibration
Multiple output options for legacy and modern systems

Copper Pipes

Premium copper tubing for heating and potable water distribution

Outer diameter range from 3/8″ to 2″ for standard applications
Type K, L, and M wall thickness options for different pressures
Rated for both potable water (NSF 61) and hydronic systems
Pressure ratings from 100 to 250 PSI depending on type

Couplings

Pipe couplings for joining sections of pipe in straight lines

Size range from 1/4″ to 2″ standard thread connections
Full-port or standard-port configurations
Material options: brass, galvanized steel, or stainless steel
Working pressures up to 2000 PSI in high-pressure versions

CPVC SCH 80 Fittings

CPVC Schedule 80 fittings for high-temperature and corrosive chemical service in industrial systems

Material: Chlorinated Polyvinyl Chloride (CPVC)
Wall thickness: Schedule 80 for high-pressure applications
Temperature rating: 0°F to 200°F continuous
Pressure rating: 200 PSI at 73°F

CPVC SCH 80 Pipe

CPVC Schedule 80 pressure pipe for high-temperature industrial fluid transport with corrosion resistance

Material: Chlorinated Polyvinyl Chloride (CPVC)
Wall thickness: Schedule 80 (heavy-wall) construction
Size range: 1/2″ to 4″ OD for standard applications
Pressure rating: 200 PSI at 73°F / 100 PSI at 180°F

Crosses

Four-way cross fittings for branch connections in perpendicular directions

Equal port or reducing port configurations available
Thread sizes from 1/4″ to 1″ on all four connections
Material options: brass or stainless steel construction
Pressure ratings up to 6000 PSI in high-pressure versions

CTS

CTS (Copper Tube Size) PVC fittings for compatibility with flexible PVC tubing systems

CTS sizing compatible with standard flexible tubing
Compression-fit or slip-fit connection styles
Available in PVC or brass construction options
Pressure rating: 100-150 PSI depending on style

Data Loggers

Continuous data capture for reliable system insight with large onboard memory

Multi-channel data logging capability
Configurable sampling intervals and data storage
Battery or external power supply options
USB or wireless data transfer capabilities

DO3000 — Dissolved Oxygen Sensor

Precision oxygen sensing using fluorescence quenching technology for water quality

Optical dissolved oxygen sensor technology
4-20mA or RS485 digital output options
Integrated temperature compensation
Maintenance-free optical design

Elbows

Pipe elbows for directional changes in 45-degree and 90-degree angles

45-degree and 90-degree angle options
Long-radius and short-radius designs for different space constraints
Thread sizes from 1/4″ to 2″ standard connections
Material options: brass, carbon steel, or stainless steel

ERW Steel Pipes

Electrically welded steel pipes for cost-effective fluid and gas transport

Diameter range from 1/2″ to 12″ for standard applications
Pressure ratings from 150 to 400 PSI depending on diameter
Schedule 40 and Schedule 80 wall thickness options
Black or zinc-coated finishes for different environments

Flange Gaskets

Sealing gaskets for PVC flanged connections providing leak-free pressure system joints

Materials: Natural rubber, EPDM, or Viton options
Standard ANSI flange bolt pattern compatibility
Thickness: 1/8″ to 1/4″ for various applications
Temperature range: -40°F to +250°F depending on material

Flanges

Pipe flanges for bolted connections in equipment and valve mounting

ANSI B16.5 standard flange patterns
Pressure classes from 150 to 2500 PSI
Bolt hole patterns accommodating 1/4″ to 1″ stud bolts
Material options: carbon steel, stainless steel, or ductile iron

Float Liquid Level Sensors

Reliable liquid level sensing with float technology for tank and vessel applications

Mechanical float with magnetic switch
Relay switching output capability
Horizontal or vertical mounting options
Multiple float materials for chemical compatibility

Flow Display & Controllers

Precision flow control for automated industrial systems with fast response time

Dual display for flow rate and totalizer readout
4-20mA and relay output options
Configurable alarm setpoints
IP67 rated enclosure for harsh environments

Flow Switches

Flow switching for automated system protection and process control

Adjustable flow setpoint range
Relay switching output for alarm/shutdown signals
Turbine or paddle wheel sensing design
Standard process connection threads

Gaskets

Sealing gaskets for flanged connections preventing fluid leakage

Rubber, cork-rubber, and PTFE material options
Standard sizes matching ANSI flange bolt hole patterns
Temperature ratings from -40°F to +500°F depending on type
Thickness options from 1/16″ to 1/4″ for different applications

Gate Valves

Full-port gate valves for reliable shutoff in straight-through flow

Rising stem design with visual position indication
Thread or flange connections for system integration
Pressure ratings from 100 to 600 PSI
Material options: bronze, ductile iron, or stainless steel

Gear Operated Butterfly Valves

Butterfly valves with gear operator for manual control of large-diameter PVC piping systems

Sizes: 3″ to 24″ for major flow control applications
Gear ratio: 25:1 or 50:1 for force reduction
Wafer or lug-body configurations available
Pressure rating: 50-150 PSI in PVC construction

GI (Galvanized Iron) Pipes

Cost-effective galvanized steel pipes for corrosion protection in water systems

Thread sizes from 1/2″ to 4″ for standard applications
Schedule 40 wall thickness for pressure applications
Pressure ratings from 100 to 200 PSI depending on diameter
Available with male or female thread configurations

Globe Valves

Throttling globe valves for precise flow control and shutoff

Manual rising stem or automatic actuator-driven operation
Thread or flange connections for system integration
Pressure ratings from 125 to 600 PSI
Material options: bronze, ductile iron, or stainless steel construction

Gravity Rollers

Non-powered gravity rollers for frictionless material flow in inclined conveyor systems

Roller diameter range: 32mm to 76mm depending on load requirements
Load capacity: 50kg to 1000+ kg per roller based on specifications
Bearing housing: Injection-molded polymide for durability
Temperature rated for room temperature applications up to continuous use

Grooved Rollers

Specialized rollers with grooved surface profiles for precision belt and chain drive applications

Groove patterns: V-groove, O-ring groove, and custom groove configurations
Roller diameter range: 38mm to 80mm for standard industrial applications
Precision ground grooves ensure <0.5mm runout tolerance
Load capacity: Up to 800kg per roller in heavy-duty configurations

Guided Wave Radar Level Sensors

Precision radar level measurement for accurate liquid level sensing in challenging applications

Guided wave radar technology
4-20mA or RS485 digital output
Extended probe for deep tank installation
High-temperature rated design options

GVS

GVS (Grooved & Victaulic Style) fittings for rapid grooved PVC piping assembly without welding

Grooved coupling mechanical connection method
No threading, welding, or solvent cement required
Integral gasket sealing with thermal cycling capability
Size range: 1/2″ to 4″ for portable system use

Inserts

Threaded inserts for creating internal threads in PVC pipes enabling removable fitting assembly

Internal threads accommodate standard male NPT fittings
Materials: PVC body with brass or stainless threads
Installation: Solvent-cemented or push-fit styles
Size range: 1/2″ to 2″ standard connections

IS750 Ion Sensors

Industrial-grade ion sensing for precise chemical control in process applications

Ion-Selective Electrode (ISE) technology
4-20mA or digital RS485 outputs
Reference electrode integrated design
Wide concentration measurement range per ion type

LD Series — Leak Detection Sensor

Leak detection sensor for early identification and fast response time

Contact-based moisture detection
Relay alarm output for alert signals
Battery or hardwired power options
Weather-resistant construction

LDC Series — Leak Detection Cable

Continuous leak detection cable system for linear area monitoring and protection

Continuous detection cable with terminal units
Pinpoint leak location identification
Relay or digital output for alarm integration
Extended cable lengths available for large areas

LDS Series — Leak Detection Sensor

Advanced leak detection sensor with high sensitivity for fast response capability

Weather-resistant sensor enclosure
Wireless or hardwired transmission options
LED indicator for visual alarm confirmation
Battery or AC power supply options

LeakDtec — Leak Detection Alarm

Leak detection alarm with audible and visual alerts for immediate notification

Multi-channel alarm monitoring station
Audible and visual alarm indicators
Relay output for automated response actions
AC or battery backup power options

LeakDtec M4 — Leak Detection Module

Integrated leak detection module with multi-channel inputs for automated system protection

Four-channel monitoring module
Modular plug-and-play architecture
Ethernet or serial connection options
DIN rail or wall-mount installation

LeakPoint — Leak Detection Alarm

Leak point alarm system for immediate detection and alert of liquid leaks

Battery-powered portable alarm unit
Audible alarm output up to 90dB
Weatherproof housing for outdoor use
Multiple sensor wireless capability

Level Displays & Controllers

Advanced level display and control for industrial process systems

Digital display with alarm relay outputs
4-20mA or digital sensor input
Configurable alarm setpoints
Panel or wall-mount installation options

Lever Operated Butterfly Valves

Butterfly valves with manual lever control for rapid one-quarter-turn shutoff in PVC systems

Sizes: 2″ to 8″ for piping system applications
Quarter-turn lever actuation for rapid control
Wafer-body mounting between standard flanges
Pressure rating: 100-150 PSI in PVC construction

LG Solar Lithium-Ion Battery Pack

Reliable solar energy storage for remote industrial power and wireless system operation

Lithium-ion battery chemistry
Integrated solar charging controller
Multiple capacity options (kWh ratings)
Temperature monitoring and thermal protection

Liquid Level Switches

Level switch for automated system control and alarm activation

Float-operated magnetic reed switch
Single or dual setpoint configurations
Horizontal or vertical mounting
Stainless steel or plastic housing options

LoRa Wireless Transmitter

Long-range data transmission for distributed industrial systems with LoRa communication

LoRa wireless protocol transmission
Long-range capability with low power consumption
Mesh network capability for multi-hop coverage
Frequency hopping for interference avoidance

MF1000 — Magnetic Flow Meter

High-accuracy magnetic flow measurement for liquid flow in demanding applications

Electromagnetic induction measurement principle
4-20mA or pulse output options
Corrosion-resistant electrode materials
Multiple flange sizes for system compatibility

MS (Mild Steel) Pipes

Standard mild steel pipes for industrial piping in protected environments

Diameter range from 1/2″ to 4″ for standard applications
Schedule 40 and Schedule 80 wall thickness options
Pressure ratings from 100 to 400 PSI depending on wall thickness
Black finish or zinc coating for corrosion protection

Nipples

Short threaded pipe nipples for connecting fittings and fixtures

Thread sizes from 1/4″ to 1″ standard connections
Length options from close (minimal length) to extended
Material options: brass, galvanized steel, or stainless steel
Pressure ratings compatible with threaded fitting systems

Oil & Fuel Filters

Specialized filtration for petroleum and fuel applications protecting engine and equipment performance

Bypass valve protection with system starvation prevention
Anti-drainback design for fuel systems and hydraulic applications
Media ratings: From 25 micron coarse to 3 micron fuel polishing cartridges
Compatibility: Mineral oil, synthetic, biodiesel, and kerosene products

ORP Sensor Transmitter

Accurate ORP monitoring for optimal system performance with temperature compensation

Temperature Compensated Measurement Range
Nexus Solid KCL Reference Design
4-20mA Direct Output
Integrated reference electrode with sealed design

PES Series — Photoelectric Sensor

Photoelectric sensor for optical liquid leak detection and early warning

Photoelectric (reflective or transmissive) sensing technology
Adjustable sensitivity range
NPN or PNP output options
IP67 rated stainless steel housing

pH / ORP Controllers

Large color LCD display for precise pH/ORP control with SimplCal® calibration

SimplCal® Two-Point Auto-Calibration
400 Days Data Logging/Trending capability
Panel/Wall/Pipe Mount / M12 Quick Connect
Relay Output / 4-20mA output options

pH Sensor Transmitter

Industry's most innovative and reliable pH sensing technology

Smart Sensor Technology with self-diagnostics
2-wire 4-20mA / 4-20mA + RS485 / 4-wire configuration
M12 Quick Connect / Flying Lead connection options
Industry-standard process connections for immediate integration

Pipe Clamps

Mechanical clamps for securing and supporting pipes to building structure

Diameter range from 1/2″ to 4″ for standard applications
Stainless steel or powder-coated carbon steel construction
Rubber-lined option for vibration isolation applications
Vibration and seismic ratings for critical system support

Pipe Hangers

Threaded rod hangers for suspending pipes from overhead structure

Threaded rod sizes from 3/8″ to 1/2″ diameter
Suspension capacity from 300 to 1000 pounds depending on assembly
Pipe diameter accommodation from 1/2″ to 4″ standard sizes
Stainless steel or galvanized construction for corrosion protection

Pipe Supports

Fixed and adjustable pipe supports for guiding and securing piping runs

Guide, anchor, and universal support types for different applications
Load capacities from 500 to 5000 pounds depending on type
Pipe diameter accommodation from 1/2″ to 4″ for standard use
Elastomer cushioning options for vibration isolation

Plugs

Threaded pipe plugs for sealing unused connections and test ports

Thread sizes from 1/4″ to 1″ standard connections
Hexagon or square head style for tool engagement
Material options: brass, steel, or stainless construction
Pressure rating compatibility with connected piping

Poly Vee Driven Rollers

Poly vee driven rollers with ribbed belt interface for positive drive transmission

Ribbed surface for poly vee belt engagement without slip
Roller diameter range: 45mm to 90mm for industrial automation
Multiple rib pitch options accommodate various belt types
Load capacity: 500kg to 1200kg depending on drive configuration

Poly Vee Pulley Driven Roller

Standalone pulley-driven rollers for belt-driven conveyor systems with customizable drive ratios

Integrated pulley diameters: 60mm to 150mm for speed ratio flexibility
Poly vee belt interface for direct motor coupling compatibility
Load capacity: 400kg to 900kg depending on pulley and motor rating
Factory-tested assembly ensures out-of-box operational readiness

PP-NAT SCH 80 Fittings

Polypropylene Schedule 80 fittings for superior chemical resistance in aggressive fluid applications

Material: Natural Polypropylene (PP-NAT)
Wall thickness: Schedule 80 (heavy-wall) construction
Temperature rating: 32°F to 180°F
Pressure rating: 150 PSI at 73°F

PP-NAT SCH 80 Pipe

Polypropylene Schedule 80 pipe for heavy-duty chemical service with superior corrosion resistance

Material: Natural Polypropylene (PP-NAT)
Wall thickness: Schedule 80 (heavy-wall)
Size range: 1/2″ to 4″ OD
Pressure rating: 150 PSI at 73°F / 50 PSI at 180°F

Pressure Gauges

Durable pressure gauges with corrosion-resistant plastic housing for precise measurement

Analog dial display with multiple pressure ranges
Glycerin-filled gauge for vibration damping
Stainless steel or brass construction options
Standard connection thread patterns

Pressure Gauges with Gauge Guards

Extensive line of corrosion resistant pressure gauges with integral molded isolators

Analog dial display with multiple pressure ranges
Glycerin-filled gauge for vibration damping
Stainless steel or brass construction options
Standard connection thread patterns

Pressure Sensors & Transmitters

Accurate pressure monitoring for reliable performance with bright LED display

4-20mA or 0-10V output options
Flush or isolated diaphragm designs
Multiple pressure range configurations
Stainless steel wetted components

ProAlert LTE Series

Advanced leak alarm with LTE wireless capability for remote notification and monitoring

LTE cellular connectivity with GPS location
Cloud-based alert management platform
Mobile app with push notifications
Configurable alerting rules and thresholds

ProPulse Series — Turbine Flow Meters

Turbine flow meter for accurate flow rate measurement in industrial applications

Turbine rotor sensor design
Pulse or 4-20mA output options
Corrosion-resistant body construction
Wide flow rate measurement range

PVC SCH 40 Clear Pipe

Clear PVC Schedule 40 pipe enabling visual flow monitoring and system integrity observation

Material: Polyvinyl Chloride (PVC) Schedule 40
Clear/transparent for full system visibility
Size range: 1/2″ to 3″ OD
Pressure rating: 100 PSI at 73°F

PVC SCH 40 Grey Fittings

Grey PVC Schedule 40 fittings for standard non-potable water and industrial applications

Material: PVC Schedule 40 non-potable rated
Color: Grey for non-potable water identification
Fitting types: Elbows, tees, couplings, reducers available
Pressure rating: 100 PSI

PVC SCH 40 Grey Pipe

Grey PVC Schedule 40 pipe for non-potable water applications with clear NSF classification

Material: PVC Schedule 40 non-potable rated
Color: Grey for water system classification
Size range: 1/2″ to 4″ OD
Pressure rating: 100 PSI at 73°F

PVC SCH 40 White Fittings

White PVC Schedule 40 fittings for potable water systems meeting NSF/ANSI 61 certification

Material: PVC Schedule 40 potable water rated
Color: White for potable water identification
NSF/ANSI 61 certified for drinking water
Pressure rating: 100 PSI

PVC SCH 40 White Pipe

White PVC Schedule 40 pipe for potable water distribution with NSF certification and corrosion resistance

Material: PVC Schedule 40 potable water rated
Color: White for potable water identification
NSF/ANSI 61 certified for safe drinking water
Size range: 1/2″ to 4″ OD

PVC SCH 80 Clear Pipe

Clear PVC Schedule 80 pressure pipe for high-pressure applications with visual flow monitoring capability

Material: PVC Schedule 80 clear
Wall thickness: Heavy-wall for high-pressure service
Size range: 1/2″ to 2″ OD
Pressure rating: 200 PSI at 73°F

PVC SCH 80 Fittings

PVC Schedule 80 heavy-wall fittings for high-pressure industrial and hazardous fluid applications

Material: PVC Schedule 80 heavy-wall
Pressure rating: 200 PSI at 73°F
Fitting types: Full range including elbows, tees, couplings
Temperature rating: 32°F to 140°F

PVC SCH 80 Pipe

PVC Schedule 80 pressure pipe for demanding industrial applications requiring higher pressure ratings

Material: PVC Schedule 80 heavy-wall
Size range: 1/2″ to 4″ OD
Pressure rating: 200 PSI at 73°F
Temperature rating: 32°F to 140°F continuous

Reducers (Concentric)

Concentric pipe reducers for step-down connection between different diameter pipes

Step-down from larger to smaller diameter
Full-port or standard-port configurations available
Thread sizes from 1″ down to 1/4″ inlet/outlet combinations
Material options: brass, carbon steel, or stainless steel

Seamless Steel Pipes

Premium seamless steel pipes for high-pressure and critical applications

Pressure ratings up to 6000 PSI in standard configurations
Diameter range from 1/2″ to 4″ for common applications
Wall thickness options from Schedule 40 to XXS
Carbon steel or stainless alloy material options

Sentinel Remote Tank Monitoring

Precision level measurement with secure wireless transmission for remote tank monitoring

Wireless cellular or RF communication
Solar-powered or battery-operated options
Cloud-based monitoring dashboard
GPS location tracking for mobile tank applications

Single Union Ball Valves

Single union ball valves enabling disconnection from one end for equipment installation and removal

Single union connection on one end
Threaded or socket connection options
Sizes: 1/2″ to 2″ for equipment connections
Pressure rating: 100-200 PSI depending on size

Sprocket Drive Rollers

Chain-driven rollers with sprocket teeth for heavy-duty powered conveyor systems

Sprocket pitch: 25.4mm (1 inch) standard for industrial chain compatibility
Roller diameter: 60mm to 90mm with sprocket tooth engagement
Load capacity: 1000kg to 3000kg+ depending on roller diameter
Chain compatibility: Standard industrial roller chain for universal integration

Square Rollers

Square-profiled rollers for bag and flat-pack handling with enhanced grip and stability

Square profile: 40mm x 40mm to 65mm x 65mm cross-section
Length: Customizable from 300mm to 2000mm per installation requirements
Load capacity: 300kg to 800kg depending on material and width
Material options: Carbon steel with zinc plating or stainless steel finish

Stainless Steel Pipes

Premium corrosion-resistant stainless steel pipes for food and chemical systems

ASTM 304 or 316 stainless steel materials
Diameter range from 1/2″ to 4″ for standard applications
Pressure ratings from 100 to 1000 PSI depending on schedule
Seamless or welded construction for different pressure classes

Submersible Liquid Level Sensors

Precision submersible level sensor for in-tank liquid level measurement

Hydrostatic pressure measurement technology
4-20mA output via integral cable
Durable stainless steel or plastic housing
Long cable ratings for deep tank applications

TB450 — Turbidity Controller

Turbidity measurement controller with advanced sensing technology

Quartz Glass Lens with Self-Cleaning Function
4-20mA / RS485 Communication outputs
Panel/Wall Mount configuration
Advanced sensing technology for turbidity range measurement

Tees (Equal Tee)

Pipe tees for three-way connections with equal or reducing port options

Equal port or reducing port configurations available
Thread sizes from 1/4″ to 1″ on all three connections
Material options: brass or stainless steel construction
Pressure ratings up to 6000 PSI in high-pressure versions

TI Series — Insertion Paddle Wheel Flow Meters

Insertion paddle wheel flow meter for pipe flow measurement in large diameter pipes

Insertion paddle wheel sensor design
4-20mA or pulse output options
Retractable design for live installation
Flow range suitable for large diameter applications

Timing Pulley Driven Rollers

Timing belt driven rollers for synchronized precision conveyor operation with zero-slip guarantee

Timing belt pitch: 5mm or 10mm HTD profiles for standard compatibility
Roller diameter: 30mm to 60mm with tooth engagement depth
Load capacity: 200kg to 600kg in light to medium-duty configurations
Tolerance: <0.2mm runout for precision positioning requirements

tkp-in-line-paddle-wheel-flow-meter-scaled

TK Series — In-Line Paddle Wheel Flow Meters

In-line paddle wheel flow meter for direct pipe integration and accurate flow measurement

In-line paddle wheel sensor construction
4-20mA or pulse output capability
Temperature-compensated measurement
Standard flange connections for integration

True Union Ball Valves

True union ball valves enabling disconnection from both ends for complete piping segment replacement

True union design with threaded connections on both ends
Full-port ball valve for minimal flow restriction
Sizes: 1/2″ to 2″ for system integration
Pressure rating: 100-200 PSI depending on size

Turbidity Sensor Probes

Reliable turbidity monitoring for clear process insights with self-cleaning capability

Wiped lens optical design for self-cleaning capability
4-20mA output with optional digital communication
High-pressure rated construction
Durable sensor housing for industrial applications

UltraFlo Series — Ultrasonic Flow Meters

Ultrasonic flow measurement for non-invasive liquid flow monitoring without moving parts

Ultrasonic time-of-flight measurement principle
4-20mA or digital RS485 output
Non-contact external mounting capability
Wide range of pipe materials and sizes

Ultrasonic Liquid Level Sensor ultapro2000-1-scaled

Ultrasonic Liquid Level Sensors

Ultrasonic level measurement for non-contact liquid level sensing

Ultrasonic time-of-flight measurement principle
4-20mA or RS485 output options
Temperature compensated design
Adjustable blanking zone for mounting configuration

Unions

Removable unions for easily disconnecting pipe sections without cutting

Three-piece union construction (nut, body, sealing seat)
Thread sizes from 1/4″ to 2″ for standard applications
Material options: brass, galvanized steel, or stainless steel
Pressure ratings up to 2000 PSI depending on material

Y Strainers

Compact inline Y-shaped strainers for piping system protection with minimal space requirements

Screen size: 1/32″ perforated plastic standard with stainless steel options
Mesh sizes: Available from 1/2″ down to 325 mesh for varied filtration needs
Port sizes: 1/2″ to 2″ with socket or threaded pipe connections
Features: Quick-removal hex cap for easy screen cleaning and replacement

Metal Pipes & Fittings

PVC Pipes & Fittings

Analytical Instruments

Leak Detection

Liquid Level Measurement

Flow Measurement

Wireless Monitoring

Pressure Measurement

Filters & Strainers

Conveyor Rollers